Saturday 31 October 2015

Scanning electron microscope image of a cats eye

SEM of hi-vis vest retroreflector
link
Our teaching fellow Su (see her blog here) has been working in our lab and is interested in the science around hi-vis vests. Photographing a hi-vis vest with the flash on, you can see the vest light up where the metallic bands are placed (photo above). These metallic looking bands are called retroreflectors, and they have the amazing ability to reflect light back at the same angle that it hit the surface. This is very strange as most surfaces reflect light in one of two ways, diffuse and specular (diagram below).
Link
Specular reflection is where the incident light and reflected light approach and leave the surface at the same angle. Think of a mirror for specular reflection. Diffuse reflection often happens when a surface is rough, and light is reflected in all different directions compared with the incident beam. A retroreflector does something unexpected - the incident beam and the reflected beam go in and come out in the same direction, parallel to each other.

Link
This ability means that light coming from the flash of a camera bounces straight back into the lens, which is why retroreflectors look so bright under a flash.

Seeing as it is the year of light and we are talking about different light-based technologies (photonics) I thought I would explain how a retroreflector works. 

Corner cube

The most basic retroreflector design is a corner cube where three mirrors are placed at right angles to each other. The incident beam will always be parallel to the reflected beam, as seen below.

Link
By adding many of these together you can make an array of corner cubes. These are often used on bikes.

Link
Link
Looking close up at the surface you can see the corner cubes which reflect the light back towards the light source. There is even one of these on the moon that was placed by Apollo 11 scientists.
Link
However, corner cubes is not what we found when we put the hi-vis vest retroreflector surface under the scanning electron microscope.

Cats eyes

This is what we found on the retroreflector surface: small glass balls stuck to the fabric in a single layer.


They are about 60-90 microns across, about the size of a human hair. To give you some scale we put one of Su's hairs on the surface.


On the right is the carbon tape we used to hold the hair down (bottom left corner of the picture). We didn't end up coating the retroreflector with gold, which would have stopped the bright spots you see on the structures. These spots are due to electrons getting stuck to the glass and not being able to drain away; we call this charging of the sample.

The cats eye works in a similar way to the corner cube but instead of two angled mirrors the light is reflected from the back of the sphere.
Link
This is the same effect that leads to animals' eyes glowing in head lights or camera flash.
Link
The back of many animals' eyes has a layer called the Tapetum Lucidum. This layer reflects light that is not absorbed by the eyes' light sensors in the retina the first time they pass through. This gives the light a second opportunity to be absorbed by the retina and is found in animals that need good vision in low light conditions, such as nocturnal animals.


Link
Another fun effect I found when I added water to the surface was iridescence (colour reflected at different angles). I am unsure if this is a photonic crystal effect like opals or due to the effect of rainbows coming from spheres.



6 comments:

  1. This is just awesome. You have explained it so clearly.

    ReplyDelete
  2. Amazing Blog Post, I really Like it. Thanks For Sharing info..To guarantee your Hi-vis safety vests product and security, you would like to wear the suitable life jacket for you.

    ReplyDelete
  3. Not only do you have retro-reflectors on your vests and hi-vis gear you also have glow in the dark, fluorescent paint. Fluorescence is when blue light is adsorbed by the yellow/orange paint and turned into red and green light (both these colours become yellow/orange when combined). Check out this video https://youtu.be/0ziPmoEcmzc?t=59s . The retroreflectors work during the night to reflect light back to cars and the fluorescence works during the daytime to turn the blue part of the sunlight into green and red (giving yellow/orange). Our eyes are more sensitive to green light than blue so the paint looks super bright during the day. If you buy a UV LED torch you can show people how it works. http://www.ebay.com.au/bhp/uv-light-torch and if you put a head lamp on and look at the retroreflectors you could show people how no matter where you stand the light is reflected directly back at you. http://www.ebay.com/sch/Headlamps/106984/bn_7225184/i.html I did these demonstrations before and they were very effective in explaining all the cool science involved in high-vis gear.

    ReplyDelete
  4. Do you think that nano cats eyes can be used in road marking paints (zeuschemicals@gmail.com)

    ReplyDelete
    Replies
    1. Sure can https://www.tenroadsglass.com/high-index-reflective-glass-beads/

      Delete
  5. Georgios Koutsoukos

    ReplyDelete